U.S. Solid 1/2″ Brass Electric Solenoid Valve 12V DC Normally Closed VITON Air Water Oil Fuel

U.S. Solid SKU: JFNSV00003 UPC: 888107093619 Condition: New Availability: Usually ships within 24 hours size: 1/2″ google product category: Hardware > Plumbing > Plumbing Valves U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, 1/2″ female threaded (NPT) connections, and strong VITON gasket. Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (<20 cst) and gasoline or other petroleum based liquids. Customers chose this general purpose valve for supplemental gas tanks, sprinkler systems, and more. Specifications Brand: U.S. Solid Model: USS-NSV00003 Size: 1/2″ Flow Aperture: 16 mm Body Material: Brass Gasket / Diaphragm / Seal: VITON Rated voltage: DC 12 V, ±10% Current: 1A Power rating: 22 W Operation Type: Direct Lift Valve Operation Mode: Normally Closed Level of protection: IP65 Operational pressure range: 0 to 116 PSI / 0-0.8 MPa (for Air, Water); 0 to 72 PSI / 0-0.5 MPa (for Oil) Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius) Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius) Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI Flow value: 4.8 Cv Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities. OVERHEATING WARNING: While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 80℃. It is fully complied with national standard: JB/T7352-2010. Energized continuously for no more than 24h at a time is recommended. CA PROP65 WARNING – This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. They are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Make sure this fits by entering your model number.
1/2″ NPT (USA National Pipe Thread)- Commonly used standard pipe thread in U.S..
SOLID BRASS- This valve’s body is made of solid brass (very corrosion resistant material).
UNIDIRECTIONAL- The arrow indicates the flow direction (horizontal mounting please).
DIRECT ACTING and NORMALLY CLOSED- The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.
VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.