Sharpe Valves 44834 Series Carbon Steel Globe Valve, Bolted Bonnet, Inline, 2″ Socket Weld

This Class 800 Sharpe 44834 series inline carbon steel globe valve has a screwed bonnet, non-rising stem, and socket weld threads on both ends, and is used to control flow (throttling) in a pipeline or water plumbing system. The valve body is constructed of carbon steel for tensile strength and hardness. The maximum pressure is 200 pounds per square inch (psi). The valve has a bolted bonnet for tight assembly and reduced risk of leakage, and socket-weld ends for connecting to unthreaded pipe ends. The joined pieces are welded together to create a tight seal against leaks. This valve meets standards American Society for Testing and Materials ASTM A105 for quality assurance.

Globe valves control flow rates in a piping system by the lift of a vertical stem and disk, which must be turned to open and close the valve. A seated disc extends into the center of the valve to act as a plug to restrict or open the flow path, depending on how tightly the valve stem is turned. The stem on globe valves can be either rising (moves up as the valve opens) to indicate if the flow is on or off, or non-rising (stem height remains constant when the valve is either open or closed) for use in small spaces. Globe valves are used in various water, gas, air, and steam piping systems that require frequent throttling operations.

Sharpe Valves manufactures a wide variety of valves, including stainless and carbon steel ball, gate, globe, and check valves. The company, founded in 1986 and headquartered in Chicago, IL, meets International Organization for Standardization (ISO) 9001:2008 standards based on Sharpe’s design and manufacturing of valves.

Make sure this fits by entering your model number.
Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline
Carbon steel valve body for tensile strength and hardness
Bolted bonnet for tight assembly and reduced risk of leakage
Socket-weld ends for welding to unthreaded pipes
Maximum working pressure of 200 pounds per square inch (psi)