PureSec Water Storage Tank Ball Valve 3/8 inch O.D.RO Tubing x 1/4 inch female pipe thread Push-Fit Elbow Shut-Off Valve

What is it?

If you’re buying this product to add to an small holding tank for the RO system, you need to confirm your tubing first. MOST systems use 1/4 inch tubing and 1/4 threaded connector on the tank. This product has a 1/4 nptf connector which is the threaded part. The push fitting is designed for larger 3/8 inch tubing.
It gives full flow and positive shut off without leakage, which is very easy to install Valve act is 90 degrees, full on to full off, with no seepage

Where to use it?

Our Shut Off Ball Valve is used to turn off the water supply to your pressure tank. Critical if you ever want to remove the tubing from the pressure tank.The Tank Shut Off Valve will thread directly onto any standard drinking water pressure tank allowing you to isolate the tank for service, or simply just remove the tubing from the tank without having to fully drain the tank first.

How to use it?

Just pop in your 3/8 inch tubing into outlet end, pushing until it won’t go in. Then Screw on the threaded bottom part to the RO tank.To remove, just push in the outer circle on tubing end and pull right out. You need to make sure the tubing is cut squared to ensure no leaks.

What you will receive?

Tank Ball Valve x5

Make sure this fits by entering your model number.
★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
★SIZE &TUBE COMPATIBLE WITH: 5 valves per pack. Size is 3/8″ Tube O.D.X 1/4“ Female Thread.; the 3/8″ is for tube push fittings, and the 1/4″ threaded goes on pipe fittings or the part that screws onto the RO tank ( Choose correct Size carefully before order)
★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
★FUNCTION&QUALITY: This piece works good to shut off the tank while you change the filters, that way you don’t waste a whole tank of good RO water.. Our quality system ensures a superior level of product quality.
★Notes: 1, No leaks if under properly installation. Put some teflon tape or O-ring(not included) on the tank outlet is better. 2. Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)