Type R622H is an Underwriters Laboratories (UL) listed regulator designed for two-stage LP-gas (propane) systems. These units are designed to reduce the tank pressure to 10 PSIG/0,69 bar.
!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.
BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.
Make sure this fits by entering your model number.
Body Sizes and End Connection Styles (inlet x outlet): 1/2-inch x 1/2-inch NPT
Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
Outlet Pressure Ranges : 8 to 12 psig / 0.55 bar to 0.82 bar
Capacity : 2,100,000 BTU/hr
Vent Size : 3/4 NPT screened
Reviews
There are no reviews yet.