Apollo 122T Series Bronze Globe Valve, Class 150, Inline, Union Bonnet, 2-1/2″ NPT Female

This class 150 Apollo 122T series inline bronze globe valve has a union bonnet, rising stem, polytetrafluoroethylene (PTFE) seat, and female National Pipe Taper (NPT) threads on both ends, and is used to control flow (throttling) in a pipeline or water plumbing system. The valve body is constructed of American Society for Testing and Material (ASTM) B62 bronze for strength and corrosion resistance, and has a PTFE seat. The valve’s maximum pressure is 300 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 150 psig for steam working pressure (SWP). It has a union bonnet to simplify inspection of the valve interior, and female NPT threads on both ends for connecting to male threaded pipes. This class 150 valve meets standard Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This rising stem globe valve is for use in various pipeline or water plumbing systems.

Globe valves control flow rates in a piping system by the lift of a vertical stem and disk, which must be turned to open and close the valve. A seated disc extends into the center of the valve to act as a plug to restrict or open the flow path, depending on how tightly the valve stem is turned. The stem on globe valves can be either rising (moves up as the valve opens) to indicate if the flow is on or off, or non-rising (stem height remains constant when the valve is either open or closed) for use in small spaces. Globe valves are used in various water, gas, air, and steam piping systems that require frequent throttling operations.

Conbraco Industries, Inc. manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices under the Apollo Valve brand. The company, founded in 1928 and headquartered in Matthews, NC, meets international standard ISO/IEC 17025:2005 and makes products that meet International Organization for Standardization (ISO) and American National Standards Institute (ANSI) standards.

Make sure this fits by entering your model number.
Inline globe valve with rising stem and union bonnet for on/off actuation and flow control (throttling) in a pipeline
Bronze valve body and PTFE seat for strength and corrosion resistance
300 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 150 psig for steam working pressure (SWP)
Union bonnet for simplified inspection of valve interior
Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes