4-Way Solenoid Valves (VERSATILE) These valves offer the most versatility as they can be used for anything. They actually have 5 ports: One port is for air going IN from your compressor. Two ports are for air going OUT to your prop’s cylinders. 2 ports are for exhaust. *3/8″ air ports. 1/4″ breather ports. Comes with: 3/8″ 5/2 4-Way Solenoid Valve Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead (3) 3/8″ Male Straight Fittings with 3/8″ push-in female (2) Brass breather vents These valves are required for Double-Acting Cylinders.Why? Because they actually switch the direction of the airflow from going in the BOTTOM of your cylinder’s inlet, to going in the TOP of your cylinders other port.This causes the cylinder to open or close very rapidly! Other Benefits of 4-Way Valves: More exhaust control to adjust speed of props. Generally larger diameter inside the solenoid allows for more air to flow when needed. Can also be used for any solenoid need that the one or two-way valves can do.
Make sure this fits by entering your model number.
These have an air inlet, an air outlet and an exhaust port.
Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift.
Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open).
Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop’s motion.
Has two 3/8″ air ports and one 3/8″ breather port. Comes with: 3/8″ 4-Way Solenoid (2) 3/8″ Male Straight fittings with 3/8″ push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead
Reviews
There are no reviews yet.