1/4 Inch 110-120 VAC Normally Open Brass Solenoid Valve Each valve is individually tested!
Highlight: Body Material: Forged high-quality solid brass
-Operation Mode: N/O (normally open)
-Pipe Size: 1/4″ NPT
-Voltage: 110-120 VAC Diaphragm/Seal Material NBR
Applications: Industrial grade highly reliable
-Mechanical Operation Type: 2-way 2-position direct acting
-Operation Mode: Normally open (valve closes when coil is energized)
-Pipe Size: 1/4″ NPT female (18 TPI)
-Orifice Diameter: 5/32″ (4 mm)
– Flow Rate: Cv = 0.5
-Flow Direction: Unidirectional (follow the arrow on valve body)
-Media: Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)
-Operating Pressure Differential: 0-145 psi (0-1 MPa, gravity-feed capable)
-Operating Temperature: 15-125 °F (-10~50 °C)
-Media Temperature: 15-180 °F (-10~80 °C)
-Dimensions: See product diagrams
-Weight: 14 oz Mounting Threads (Base) M4
Electrical
-Voltage: 110-120 VAC Current 0.2 Amp
-Wattage: 24 Watt
-Coil: Copper wire in resin-molded casing
-Connectors: DIN
Material:
-Body: Brass
-Insert: Stainless steel (plunger, spring, etc.)
-Seal NBR (aka Buna-N, Perbunan, and nitrile rubber)
-Diaphragm: NBR (fiber-reinforced)
Additional Info: Available Coil Voltages 110/120VAC,
Available Port Sizes 1/4″
Available Types of Operation: Normally Closed and Normally
Open
Replacement/Spare Parts: Coil
Make sure this fits by entering your model number.
★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment
★110/120 VAC, 50/60 Hz 12 Watts, Normally Closed (Valve opens when energized)
★Operating Pressure: 0 PSI Min, 102 PSI Max;1/4″NPT Female Port
★Single-Direction / Brass Body / Viton Seal / Stainless Steel Armature and Spring & Plunger
★Working media: Air, Gas, Liquid, Water / Operation Model: Direct Lift Piston, Normally Closed
Reviews
There are no reviews yet.